Loop 1604 will be partially closed again this weekend on the northwest side but will reopen on Mother’s Day

SAN ANTONIO – There’s another round of major construction closures in the far northwest this weekend, but motorists will get some relief on Mother’s Day.

As part of the Loop 1604 North expansion project, TxDOT will have multiple closures beginning at 9 p.m. Friday, May 10 through 7 a.m. Sunday, May 12, weather permitting. These closures are:

• Loop 1604 eastbound main lanes, collector-distributor road and frontage road at the I-10 interchange.

• I-10 westbound collector interchange at the Loop 1604 Interchange.

• I-10 eastbound main lanes and collector junction at Loop 1604 interchange.

• All four clovers at the Loop 1604 and I-10 interchange.

However, the westbound main lanes of Loop 1604 and westbound I-10 will remain open through the weekend, but drivers will be unable to connect to the Cloverleafs.

These are the minimum closures required for the expected work. All closures can be changed and modified if necessary. During this time, local law enforcement will direct traffic through intersections. Drivers are asked to plan for delays in advance. Below you will find a map and detour information.

INFORMATION ABOUT THE DIVISION

I-10 WB to Loop 1604 WB

All I-10 WB travelers wishing to access Loop 1604 WB will exit at Exit 556B to the I-10 WB frontage road and follow the I-10 WB frontage road to the Loop 1604 interchange. Travelers will turn at the signalized intersection Turn left onto the frontage road of Loop 1604 WB and join the main streets of Loop 1604 WB after Valero Way.

I-10 EB Mainlanes and Loop 1604 EB

All travelers on I-10 EB and those wishing to access Loop 1604 EB will exit at Exit 556 B to the I-10 EB frontage road and follow the I-10 EB frontage road through the Loop 1604 interchange. Traffic may use the entrance ramp get onto the main lanes of I-10 EB immediately after the Loop 1604 interchange. Travelers wishing to access the main roads of the Loop 1604 EB will use the U-turn at UTSA Boulevard and then follow the I-10 WB frontage road to the Loop 1604 EB frontage road. Traffic can access the main lanes of Loop 1604 EB via the entrance ramp just before Vance Jackson Road.

Loop 1604 EB Mainlanes and to I-10 WB

All travelers on the Loop 1604 EB main road and Loop 1604 EB main roads, as well as those wishing to access I-10 WB, will use the Loop 1604 EB exit to I-10 EB. Traffic will exit at Exit 557 and then turn around at UTSA Boulevard and follow the I-10 WB frontage road to the Loop 1604 EB frontage road. Traffic can access the main lanes of Loop 1604 EB via the entrance ramp just before Vance Jackson Road. Travelers wishing to access I-10 WB will access the main lanes of I-10 WB via the first ramp after the U-turn at UTSA Boulevard.

Loop 1604 WB main tracks to IH-10 EB

All travelers on the main roads of Loop 1604 WB wishing to access IH-10 EB will exit the main road after Vance Jackson Road on the frontage road of Loop 1604 WB. Traffic follows the Loop 1604 WB frontage road through the IH-10 interchange and then turns left onto the IH-10 EB frontage road at the signalized intersection. Traffic can then access the IH-10 EB main lanes via the entrance ramp just before UTSA Boulevard.

Additional major closures are currently planned at Loop 1604 and the I-10 interchange through mid-May to allow crews to install steel beams for construction of the flyover ramps. There are no major construction closures planned for the Memorial Day holiday weekend.

Also read: Plan to beat downtown traffic this weekend with two Luke Combs shows at the Alamodome and other events